- CHANGE OIL INLET PLUG
The red plug on the pump is specially designed for transportation, before using the unit, please replace the red plug with the yellow plug or the brass plug in the spare parts package.
- PRESSURE REGULATOR
The pressure setting is preset at the factory to achieve optimum pressure and cleaning. If need to lower the pressure, the following methods can be used:
- Back away from the surface to be cleaned. The further away the user is, the less pressure is on the surface to be cleaned.
DO NOT try to increase pump pressure, a higher pressure setting may damage the pump.
- Change to the 40° white nozzle. This nozzle delivers a less powerful stream of water and a wider spray pattern.
- Adjust the pressure regulator on the pump. Turn the pressure regulator knob anti-clockwise to lower the pressure. Once you have finished using your pressure washer, return the pressure regulator to it's original position by turning it clockwise.
DO NOT try to turn pressure regulator knob past the build-in stop line otherwise damage to the pump may be resulted.
- TYPE OF NOZZLE
Your unit is equipped with four spray nozzles. Each nozzle is colour coded, and delivers a specific spray pattern for a particular cleaning purpose.
DO NOT attempt to change the nozzle while the unit is running.
Turn the engine or gun OFF before changing the nozzle.